CAUTION
You will need a FTDI 5v or USB-TTL cable to use this board based on the MULTIWII project.
No sensors included, you'll have to get it separately.
Firstly a huge thank to Alexinparis for this project and has agreement to make this board MADE IN FRANCE.
Manual currently being written
The main difference with other systems is that it includes all the options and
manipulations required for assembly of a shield-based multiwii project :
- NO More arduino pro mini
- No need for Shield
- Everything is supplied, ready to use.
Note:
To program and set the multicopter, usb-ttl converter is required.
FTDI cable is optional.
Advantages:
- MK Format (50x50mm)
- ATmega 328 PU DIP easy to change.
- Wii Motion Sensor Plus (or other) supplied with 3.3 V
- I2C bus adapter-level (3v <-> 5v)
- Serial port available 3 times (setup / reprogramming, LCD, or GPS)
- I2C Port 3 times available (sensor wmp - accelerometers (Nunchuk) - barometer...)
- Option for 5V supply Recom servos (pod camera) and FPV equipment.
- 2 outputs servo stabilized.
- 1 buzzer output (optional).
- 1 measuring input voltage lipo battery.
- Tricopter, quadricopter, quadricopter X Hexacoptère, Y6 compatible.
- 2 LEDs indication (status and alarm).
- Port A2 microcontroller available for future updates.
- Works with Tricopter quadricopter or with a standard PPM receiver.
- Works with Hexacoptère Y6 and a receiver with the outgoing frame ppm on a single wire, or use
PPM encoder optional.
- Designed and thoroughly tested in flight by the team fpv4ever
- Approved by project creator MultiWiiCopter Alexandre Dubus (AlexinParis)
rss
DJI Innovations
