More details

Flying wing - "SKIPPER EPP" Morlock Family

The model is epp cut cnc machine.

Wingspan - 137 cm

Length - 65 cm

Weight of the same elements epp - approximately 370 g

Wing area - 42 dm2. Wing has given entangled in chaos geometric 3%. MH82 wing profile. Profile is not modified - ailerons are cut from the lobe. The hull is complete (made of one piece epp) - according to your needs, you can cut out the equipment bay.

Estimated time of laminating and mounting equipment-10h

Includes:

• Elements of the epp
• To strengthen the glass rods
• Motor rib
• Levers rudders
• Wire for pushrods
• Laminating film wings (hot) - weight 45g/m2
• Instruction on CD in the form of photographs and a description of where the center of gravity and how to pre-set model.

The proposed equipment (not included):

Basic version:

• Turnigy motor - C2830 - 1100KV + propeller 9x4, 7 (or similar)
• Controller 3F 25-30A (corresponding to the engine)
• 2 servos - moment of 2.2 - 2.5 kg / cm (eg, Tower Pro MG 90)
• 2200-3s battery 3000mAh
• Receiver

Flying Weight 940 g. The mean time of flight motor (flying economic) 25-30 min.

The model can be equipped with FPV.

Version of the FPV:

• Engine Turnigy - SK3530 - 1400KV + propeller 10x4, 7 (or similar)
• Controller 3F 40-50A (corresponding to the engine)
• 2 servos - moment of 2.2 - 2.5 kg / cm (eg, Tower Pro MG 90)
• 2 x 3s 3s 2200mAh + 1000mAh battery (power FPV)
• Receiver
• FPV equipment

Flying Weight 1370g. The average flight time of the motor (flying economic) 25-30 min. As determined by the GPS - the maximum speed of 115km / h, economical cruising speed of 50 km / h, landing approach to 20km / h.

Launch the model by hand is very easy. The model flies well, is very agile, has a large range of speeds, not "afraid" of wind. It is highly resistant to accidents.

Film (http://www.youtube.com/watch?v=PbExH77PQyU)

No customer comments for the moment.

Only registered users can post a new comment.